GARAGE DOOR OPENERS R US 

Garage Door Opener Parts

Sales 1-480-247-2094

Garage Remote Controls

Residential and Commercial

 

Customer Assistance

1st Garage Door Openers, Inc.
 BBB Business Review

HOME

 
LiftMaster Garage Door Openers Chamberlain Sears Craftsman Garage Master Access Master

REMOTE CONTROLS

REPAIR PARTS

RECEIVERS: RESIDENTIAL COMMERCIAL

KEYLESS ENTRY

SAFETY SENSORS

WALL CONTROLS

LOGIC BOARDS

BACKUP BATTERY

SURGE PROTECTION

1/2 H.P. MOTOR UNITs

MOTION DETECTOR ALERT

CHAMBERLAIN LIFTMASTER GARAGE DOOR OPENER SYSTEMS

CUSTOMER ASSISTANCE

ACCESSORIES

LUBRICANT

WIRELESS HOME INTERCOMS

UNIVERSAL REMOTE AND KEYLESS

LASER PARKING

DRIVEWAY ALERT

ACCESSORIES FOR YOUR HOME, CAR AND GARAGE

CODING INSTRUCTIONS

SHIPPING and RETURNS

WARRANTY INFO

CANCELLATION POLICY

ABOUT US

FAX OR CHECK ORDERING FORM

SITE MAP

CHAMBERLAIN BRAND NAMES

315 MHz INFO

LOGIC BOARD COMPATIBILITY LIST

RETURN FORM

All Online Ordering
Is Safe and Secure

Same or Next Day Shipping USPS

Click for the BBB Business Review of this Garage Doors & Openers 
in Kissimmee FL

Review www.garagedooropenersrus.com on alexa.com

 

LiftMaster Garage Door Openers 972LM Security+ Remote Control Coding Instructions

LiftMaster PROFESSIONAL

Model 972LM Security + 2 Channel Remote Control

The 972 remote control can activate two separate residential or commercial garage door openers and/or gate openers.

Programming instructions are described below. Please refer to the original receiver programming for commercial and gate products.

Both push buttons are factory programmed to work with Security+ receivers having an orange “learn” button. The rolling code between these channels are the receiver changes with each use, randomly accessing over 100 billion new codes. 

As an added feature, the push button on the right is capable of learning or being trained to duplicate or match another CGI manufactured fixed code or billion-code remote. This feature is normally used when several remotes are required to operate one fixed code device such as a gate opener or commercial dock door. In this case, the code transmitted to the receiver remains constant or fixed, not using the Security+ format.

NOTE: The push button on the left cannot be changed from Security+, only the right button is trainable.

Instructions are described below:

  1. Press and release the “learn” button on the motor unit.  This can be found where you see the antenna wire hanging from the motor head (you may have to take the lens cover off). If antenna wire is not hanging from motor head then you have an external receiver which is a black box approx. 6" x 2" mounted somewhere in the garage with a antenna wire hanging from it (pop off cover to find Learn Code Button).The learn indicator light will glow steadily for 30 seconds.
  2. Within 30 seconds, press and hold the button on the hand-held remote that you wish to operate your garage door.
  3. Release the button when the motor unit light blinks. It has learned the code. If light bulbs are not installed, two clicks will be heard.

To Erase All Codes From Motor Unit Memory

To deactivate any unwanted remote, first erase all codes:

Press and hold the “learn” button on motor unit until the learn indicator light goes out (approximately 6 seconds). All previous codes are now erased. Reprogram each remote or keyless entry you wish to use.

*************   WARNING   *************

            Moving Door can cause serious injury or death.

·         DO NOT install transmitter unless the door operator’s safety reverse works as required by the door operator’s manual.

·         Wall control must be mounted in sight of door, at least 5 feet above floor and clear of moving door parts.

·         Keep people clear of opening while door is moving.

·         DO NOT allow children to play with the transmitter or door operator.

If safety reverse does not work properly:

·         Close door then disconnect operator using the manual release handle.

·         DO NOT use transmitter or door operator.

·         Refer to Door and Door Operators Owner’s Manuals before attempting any repairs.

_________________________________________________

            Electrical Shock can cause serious injury or death.

·         Power cord must be unplugged before attaching any wires,

·         Be sure wire ends do not touch each other or other terminals.

If you have questions or if you need a manual, contact the distributor or manufacturer of the operator.

***************************************************************************************************************

When Several Remotes operate one device:

To match the 972LM to another CGI manufactured remote’s code (Remote Control X):

  1. Begin by having both the 972LM and Remote Control X available.
  2. Press and hold both buttons on the 972LM until the yellow indicator light, visible on the bottom through a small hole, begins to blink. It will blink for 30 seconds: during this time it is in the learn or training mode, and the buttons can be released.
  3. While it is in learn mode, hold Remote Control X, another CGI fixed or billion-code transmitter, back to back with FCC labels touching.
  4. Press and hold the Remote Control X push button as you slowly slide the remotes across each other until the 972LM indictor light blinks very rapidly, indicating it has learned the code. (If Remote Control X is also a 972LM, you must press and hold its right push button).
  5. The right button is now sending the same identical coded signal as Remote Control X. This code will remain inside the 972LM until replaced with another new code by repeating steps 1-4 above, or by resetting to Security+.

Resetting the Right push button back to Security+ as follows:

Push and hold both buttons while observing the small yellow indicator light. Hold both buttons for ten seconds until the yellow indicator light stops blinking. The remote has defaulted to one of six randomly preprogrammed Security+ settings.

The Remote Control Batteries:

The Lithium batteries should produce power for up to 5 years. To replace, pry open case, insert batteries positive side up (+). Dispose of old batteries properly.

 

Home | Remotes | Keyless Entry | Repair Parts | Receivers | Safety Sensors | Wall Controls | Extension KitsSurge Protectors | Lubricants | Laser Parking Accessories | Driveway Alert | Home Accessories | Motor Unit | Coding Instructions  | About Us | Customer Assistance| Remote Compatibility | Boards | Fax or Check Orders | Shipping & Returns | Compatible Brand Names | Site Map |

ACCESS MASTER, ANAHEIM DOOR, GARAGE DOOR OF INDIANAPOLIS, GARAGE MASTER, DO-ITS, HOME HARDWARE (CANADA), JOHN GREENE, MASTER MECHANIC, RAYNOR (1997 - PILOT, AVIATOR, COMMANDER), STEEL CRAFT, TRUE GUARD, WAYNE DALTON, LIFTMASTER, SEARS CRAFTSMAN, MONARCH (EARLY 90'S), NAVIGATOR 2245RGD, PILOT GARAGE DOOR OPENER 2265RGD, COMMANDER 2220RGD, AVIATOR GARAGE DOOR OPENER 2280RGD, ENDEAVOR 2585RGD, ULTRA 2595RGD, FORMULA I, LINK, ULTRALIFT, POWER MASTER, SEARS AUTOMATIC DOOR OPENER, LIFTMASTER PROFESSIONAL, CARRIAGE HOUSE, PASSPORT, SENTX, ELITE GATE OPERATORS, CHAMBERLAIN DO-IT-YOURSELF, WHISPER DRIVE, SEARS BEST CRAFTSMAN, SECURITY+, BILLION CODE, ESTATE SERIES WITH THE EVERCHARGE™ BATTERY BACKUP SYSTEM, PREMIUM SERIES, GATE OPERATORS, CRAFTSMAN CHAIN DRIVE GARAGE DOOR OPENERS, ELECTROLIFT and all other Brands of Garage Door openers are registered trade names of the respective entities and are only used for reference

Copyright © 2010 - 2017  All Rights Reserved. No part of this site can be reproduced in any form or by any means, photocopying, electronic, mechanical, or otherwise, without the prior written permission of  1st Garage Door Openers Inc.